Adjust Sleep Mode on Connected Frame

Your Luvlink Connected Frame is equipped with a sleep mode feature that automatically switches off the display at a set time and reactivates it at another designated time. This function effectively conserves energy while ensuring your frame remains capable of receiving new photos even during its 'sleeping' period. 

Below, you'll find a guide on how to configure the duration of the sleep mode.

Adjust Sleep Mode

  1. Navigate to Settings. 
  2. Select the Display submenu.
  3. Choose "Sleep mode."
  4. Initially, set the start time for sleep mode by selecting the hour and then the minutes.
  5. Subsequently, set the end time for sleep mode by selecting the hour and then the minutes.

Note: You can toggle between A.M. and P.M. as needed.

Add a New Schedule

Adding new schedules can be super handy, especially if you need different schedules for different days. Maybe you like to sleep in a bit on Saturdays and Sundays – totally understandable!

To add a new schedule, just tap thebutton in the top-right corner. Then, adjust the interval to your liking, and don't forget to toggle the days you want it to apply to.

Here's an example of a schedule set on a frame, which wakes up at 7:00 AM and sleeps at 11:00 PM from Mondays to Fridays.

On Saturdays and Sundays, however, the frame wakes up at 8:30 AM sleeps at 11:30 PM.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.